123.hp.cóm/sétúp - Install & Start Printing

Welcome to the 123.hp.cóm/sétúp HP site. Download the software from 123.hp.cóm/sétúp and set up your printer. Then, Get started to installed 123.hp.com setup and get able to connect the printer to the network through a USB cable or use a wireless HP printer. Start printing across devices. Through the 123.hp.cóm/sétúp website, you can use multiple actions for HP printers such as printer software and driver installation, creating an account, cartridge installation, and more. Get the software today, explore your world, and find the guidance.

Key Factors you should know while setting up HP software with 123.hp.cóm/sétúp

  • Make sure the printer is powered on.
  • The system is connected to Wi-Fi or a good internet connection.
  • The Wi-Fi key and details entered are correct.
  • The USB should also be working.
  • Get updated software from 123.hp.cóm/sétúp site.
  • Upgrade the operating system from time to time.

Download and install HP printer software

If your printer is following the above points, then you can start downloading HP software in few steps shown below;

  • Power on the PC and HP printer.
  • Go to 123.hp.cóm/sétúp website.
  • Enter the HP printer model number and select a driver.
  • Click Download to get the most recent HP software.
  • Locate the downloaded file and install the HP setup.

Steps to setup HP printer using 123.hp.cóm/sétúp

The HP setup page helps the user to set up a printer on their system. These steps are only for those users who are using the printer for the first time as well as it provides lots of information during the consequent needs. So, if you are new to hp printer and wondering how to set up the printer then check out the below-stated steps:

  1. Once you receive the printer, unpack it and place it at the preferred location.
  2. Bring all the cables from the box and plug them at their preferred place. You can check the manual to figure out which cable fits where.
  3. Connect the printer with the power source and move to the next step.
  4. Now you need to fill the cartages with the ink and to the successful filling hold the cartridges from both sides so that ink can go to the corresponding slots.
  5. Once you fill the ink in the cartridges bring the papers and load them in the paper tray of the printer.
  6. Further, you need to download the drivers for the specific model which you will find on 123.hp.cóm/sétúp.
  7. Open it with the help of a browser. Here you can select the model of the printer from the various options to get the drivers. Download and install the drivers carefully.
  8. On this page, you will able be able to find the instruction manual for setup by using your HP printer’s model number.
  9. Once you install the drivers test the Hp printer by taking printout.